Accessories.
![](https://mordennational.com/wp-content/uploads/2023/07/Canalplast-BANDIERA-FILETTO-comp286167.jpg)
![](https://mordennational.com/wp-content/uploads/2023/07/image-40.png)
![](https://mordennational.com/wp-content/uploads/2023/07/CONTRTB.png)
Snap-on cross arm for 3.5 inch (90mm) trunking
Features:
• For use with CON90
• Colour: Blue
• Used to keep pipes and wires in the correct position
• Clips onto the lip of trunking while still aloowing the cover to be snapped on
![](https://mordennational.com/wp-content/uploads/2023/07/CONTRTB.png)
Snap-on cross arm for 2.75 inch (70mm) trunking
Features:
• For use with CON70
• Colour: Orange
• Used to keep pipes and wires in the correct position
• Clips onto the lip of trunking while still aloowing the cover to be snapped on
![](https://mordennational.com/wp-content/uploads/2023/07/CONTRTB.png)
Snap-on cross arm for 5 inch (125mm) trunking
Features:
• For use with CON125
• Colour: Green
• Used to keep pipes and wires in the correct position
• Clips onto the lip of trunking while still aloowing the cover to be snapped on
![](https://mordennational.com/wp-content/uploads/2023/07/CONTP.png)
Snap-on end cap for 3.5 inch (90mm) trunking
Features:
• For use with CON90
• Colour: White
![](https://mordennational.com/wp-content/uploads/2023/07/CONTP.png)
Snap-on end cap for 2.75 inch (70mm) trunking
Features:
• For use with CON70
• Colour: White
![](https://mordennational.com/wp-content/uploads/2023/07/CONTP.png)
Snap-on end cap for 5 inch (125mm) trunking
Features:
• For use with CON125
• Colour: White
![](https://mordennational.com/wp-content/uploads/2023/07/CONSET-scaled.jpg)
Snap-on trunking reducer to go from 3.5 inch (90mm) to 2.75 inch (70mm) trunking
Features:
• For use with CON90 reducing to CON70
• Colour: White
• Snaps under T-joints and over reduced trunking for clean and easy installation
![](https://mordennational.com/wp-content/uploads/2023/07/CONSET-scaled.jpg)
Snap-on trunking reducer to go from 5 inch (125mm) to 3.5 inch (90mm) trunking
Features:
• For use with CON125 reducing to CON90
• Colour: White
• Snaps under T-joints and over reduced trunking for clean and easy installation
![](https://mordennational.com/wp-content/uploads/2023/07/Canalplast-BANDIERA-FILETTO-comp286167.jpg)
Clip on bubble level
Features:
• For use with trunking with snap-on covers
• Colour: Blue
• Clips onto the lip of the trunking for hands-free use
![](https://mordennational.com/wp-content/uploads/2023/07/Canalplast-BANDIERA-FILETTO-comp286167.jpg)
Snap-on straight soffit inlet for 3.5 inch (90mm) trunking
Features:
• For use with CON90
• Colour: White
• For installations where the line sets must enter the building through a soffit
• Extended flange allows for clean installations into a soffit
![](https://mordennational.com/wp-content/uploads/2023/07/CONPAM.png)
Snap-on straight wall inlet for 3.5 inch (90mm) trunking
Features:
• For use with CON90
• Colour: White
• Extended flange allows for clean installations into the wall
![](https://mordennational.com/wp-content/uploads/2023/07/CONPAM.png)
Snap-on straight wall inlet for 2.75 inch (70mm) trunking
Features:
• For use with CON90
• Colour: White
• Extended flange allows for clean installations into the wall
![](https://mordennational.com/wp-content/uploads/2023/07/CONPAM.png)
Snap-on straight wall inlet for 5 inch (125mm) trunking
Features:
• For use with CON125
• Colour: White
• Extended flange allows for clean installations into the wall
![](https://mordennational.com/wp-content/uploads/2023/07/CONGFX.png)
Flexible joint insert for 3.5 inch (90mm) trunking
Features:
• For use with CON90
• Colour: White
• Slides into the ends of two pieces of trunking to create a pliable joint
![](https://mordennational.com/wp-content/uploads/2023/07/CONGFX.png)
Flexible joint insert for 2.75 inch (70mm) trunking
Features:
• For use with CON70
• Colour: White
• Slides into the ends of two pieces of trunking to create a pliable joint
![](https://mordennational.com/wp-content/uploads/2023/07/CONGU.png)
Snap-on joint for 3.5 inch (90mm) trunking
Features:
• For use with CON90
• Colour: White
• Snaps over two pieces of CON90 trunking for a clean joint
![](https://mordennational.com/wp-content/uploads/2023/07/CONGU.png)
Snap-on joint for 2.75 inch (70mm) trunking
Features:
• For use with CON70
• Colour: White
• Snaps over two pieces of CON70 trunking for a clean joint
![](https://mordennational.com/wp-content/uploads/2023/07/CONG.png)
Snap-on joint for 3.5 inch (90mm) trunking
Features:
• For use with CON90
• Colour: White
• Snaps over two pieces of CON90 trunking for a clean joint
![](https://mordennational.com/wp-content/uploads/2023/07/CONG.png)
Snap-on joint for 2.75 inch (70mm) trunking
Features:
• For use with CON70
• Colour: White
• Snaps over two pieces of CON70 trunking for a clean joint
![](https://mordennational.com/wp-content/uploads/2023/07/CONG.png)
Snap-on joint for 5 inch (125mm) trunking
Features:
• For use with CON125
• Colour: White
• Snaps over two pieces of CON125 trunking for a clean joint
![](https://mordennational.com/wp-content/uploads/2023/07/CONEVOCUTTER.png)
Cutting tool specially designed for the easy cutting of trunking
Features:
• For use with trunking with snap-on covers
• Rugged design for exceptional durability
• Notches built-in to make cutting trunking easy
![](https://mordennational.com/wp-content/uploads/2023/07/CONCT.png)
Snap-on T-joint for 3.5 inch (90mm) trunking
Features:
• For use with CON90
• Colour: White
• Snaps over trunk reducer for clean finish
![](https://mordennational.com/wp-content/uploads/2023/07/CONCT.png)
Snap-on T-joint for 5 inch (125mm) trunking
Features:
• For use with CON125
• Colour: White
• Snaps over trunk reducer for clean finish
![](https://mordennational.com/wp-content/uploads/2023/07/CONCPV.png)
Snap-on 45-135 deg variable flat bend for 3.5 inch (90mm) trunking
Features:
• For use with CON90
• Colour: White
• Tongue and groove design for quick assembly
![](https://mordennational.com/wp-content/uploads/2023/07/CONCPV.png)
Snap-on 45-135 deg variable flat bend for 3.5 inch (90mm) trunking
Features:
• For use with CON70
• Colour: White
• CONCPV70 is CONCPV90 with a CONRD90 for each end of the fitting to reduce the trunking size to a CON70
• Tongue and groove design for quick assembly
![](https://mordennational.com/wp-content/uploads/2023/07/CONCP.png)
Snap-on 90 degree flat bend for 3.5 inch (90mm) trunking
Features:
• For use with CON90
• Colour: White
![](https://mordennational.com/wp-content/uploads/2023/07/CONCP.png)
Snap-on 90 degree flat bend for 2.75 inch (70mm) trunking
Features:
• For use with CON70
• Colour: White
![](https://mordennational.com/wp-content/uploads/2023/07/CONCP.png)
Snap-on 90 degree flat bend for 5 inch (125mm) trunking
Features:
• For use with CON125
• Colour: White
![](https://mordennational.com/wp-content/uploads/2023/07/CONCM.png)
Snap-on 90 degree wall inlet for 3.5 inch (90mm) trunking
Features:
• For use with CON90
• Colour: White
• Extended flange allows for clean installations into the wall
![](https://mordennational.com/wp-content/uploads/2023/07/CONCM.png)
Snap-on 90 degree wall inlet for 2.75 inch (70mm) trunking
Features:
• For use with CON70
• Colour: White
• Extended flange allows for clean installations into the wall
![](https://mordennational.com/wp-content/uploads/2023/07/CONCM.png)
Snap-on 90 degree wall inlet for 5 inch (125mm) trunking
Features:
• For use with CON125
• Colour: White
• Extended flange allows for clean installations into the wall
![](https://mordennational.com/wp-content/uploads/2023/07/CONAI.png)
Snap-on 90 degree inside bend for 3.5 inch (90mm) trunking
Features:
• For use with CON90
• Colour: White
![](https://mordennational.com/wp-content/uploads/2023/07/CONAI.png)
Snap-on 90 degree inside bend for 2.75 inch (70mm) trunking
Features:
• For use with CON70
• Colour: White
![](https://mordennational.com/wp-content/uploads/2023/07/CONAI.png)
Snap-on 90 degree inside bend for 5 inch (125mm) trunking
Features:
• For use with CON125
• Colour: White
![](https://mordennational.com/wp-content/uploads/2023/07/CONAE.png)
Snap-on 90 degree outside bend for 3.5 inch (90mm) trunking
Features:
• For use with CON90
• Colour: White
![](https://mordennational.com/wp-content/uploads/2023/07/CONAE.png)
Snap-on 90 degree outside bend for 2.75 inch (70mm) trunking
Features:
• For use with CON70
• Colour: White
![](https://mordennational.com/wp-content/uploads/2023/07/CONAE.png)
Snap-on 90 degree outside bend for 5 inch (125mm) trunking
Features:
• For use with CON125
• Colour: White
![](https://mordennational.com/wp-content/uploads/2023/07/CONSET-scaled.jpg)
Compact, sleek, and easy to install lineset trunking with snap-on covers. 78 inch (2m) length of 5 inch (125mm) width trunking.
Features:
• All trunkings are equipped with a removable and protective film to prevent dirtiness and scratches
• Italian design with rounded edges for aesthetic appeal
• Quick snap-on design provides easy installation and secure fit
• Available in 3 different sizes
• Made with ultra reliable, weather resistant, fire resistant, UV stabilized PVC material
• UV stabilized
![](https://mordennational.com/wp-content/uploads/2023/07/CONSET-scaled.jpg)
Compact, sleek, and easy to install lineset trunking with snap-on covers. 78 inch (2m) length of 3.5 inch (90mm) width trunking.
Features:
• All trunkings are equipped with a removable and protective film to prevent dirtiness and scratches
• Italian design with rounded edges for aesthetic appeal
• Quick snap-on design provides easy installation and secure fit
• Available in 3 different sizes
• Made with ultra reliable, weather resistant, fire resistant, UV stabilized PVC material
• UV stabilized
![](https://mordennational.com/wp-content/uploads/2023/07/CONSET-scaled.jpg)